Sparks behind the waveguide cover, a hum with no heat, or a unit that keeps running after you open the door: one call to Acdc Appliance Repair connects you with a licensed, insured independent microwave pro near Leander who works on over-the-range, built-in and drawer models.
The cabinet hides a high-voltage capacitor that can store a deadly charge even when the unit is unplugged. That single part is the reason microwave repair should go to a trained pro, not to a weekend project.
Acdc Appliance Repair is a free referral service. Our dispatchers listen to the symptom, then route the call to an independent local pro who handles microwave electronics and mounting work.
The contractors in our network are independent businesses that carry the license and insurance local rules require. Ask to see both at the door.
A magnetron or control board for a built-in can be a real expense. The technician writes the quote before any work starts, so you can compare it to a replacement unit and decide.
Calls go to an independent technician whose route runs close to Leander. If the route has room, a pro can frequently reach you that same day, and you get the arrival window before the call wraps up.
The right pro arrives with an insulated capacitor discharge tool, a meter for testing the diode and transformer windings, the tech sheet for your model, and a survey meter to confirm no leakage once the repair is done.
This is the work we route for OTR, wall-mounted, drawer and convection combo microwaves. Every job starts by safely bleeding the capacitor before a single meter lead goes in.
The fan spins, the light glows, the plate turns, and the coffee comes out cold. The usual suspects are the magnetron, the high-voltage diode, the capacitor, or the transformer. The technician tests each one with the power off and the capacitor discharged.
Sparking inside the oven often traces to a food-soaked waveguide cover, bare metal where the cavity paint chipped, or a worn rack support in a combo unit. Ignoring it can scorch the cavity and kill the magnetron.
Microwaves use a chain of door interlock switches plus a monitor switch. When a switch sticks, the monitor switch shorts the line on purpose and blows the line fuse, so the whole unit goes dark. A unit that runs with the door open needs to be unplugged right away.
When keys stop responding or the oven refuses to shut off at zero, the touchpad membrane or a welded relay on the control board is usually behind it. The pro tests the keypad matrix and the relays first so the right part gets ordered.
An over-the-range microwave also works as the range hood. Grinding fans, a lamp that never turns on, greasy metal filters, and a spent charcoal filter on recirculating installs all get handled here.
A plate that will not spin usually needs a turntable motor or a new coupler. OTR units that sag or rattle may have a loose wall bracket or top bolts pulled through the cabinet, which is a safety issue with a hot stove below.
Use this as a quick read before you call. Share what you see with the dispatcher, and the technician can bring the most likely parts.
| Symptom | Common cause | What the tech checks |
|---|---|---|
| Runs, light on, no heat | Magnetron, diode, capacitor or transformer failure | Each high-voltage part with the capacitor discharged |
| Completely dead, no display | Blown line fuse from a failed door switch | Fuse, interlock switches, monitor switch |
| Sparks or smoke inside | Burnt waveguide cover, chipped cavity paint | Cover, cavity surface, stirrer, rack supports |
| Keeps running at zero or with door open | Welded relay or failed interlock | Control board relays and door switch chain |
| Plate will not turn | Turntable motor or coupler | Motor continuity, coupler, roller ring |
| Vent fan loud or dead | Fan motor bearings, greasy filters | Fan motor, damper, grease and charcoal filters |
A basic countertop microwave usually is not worth a service call, and most technicians will tell you so on the phone. Over-the-range units, built-in wall models, drawer microwaves and convection combos are a different story. They cost more, they fit a cutout or bracket, and swapping one means trim kits, cabinet work and a vent connection.
Leave the cabinet closed and pick up the phone. The dispatch line is answered around the clock.
Let the dispatcher know if the unit is over-the-range, built-in, a drawer or a combo, and describe the symptom. The model number is usually on a sticker inside the door opening, and having it speeds up parts.
An independent technician working close to Leander gets the job, and the dispatcher shares the arrival window. Same-day arrivals are routine when a local independent pro is free.
First comes a safe discharge of the capacitor, then meter tests on the magnetron, diode, transformer, door switches and board. An OTR unit sometimes has to be lifted off its mounting plate. The written, upfront quote comes before any work begins, and you decide.
After the repair, the pro heats a cup of water to confirm output and, after any high-voltage work, sweeps the door seal with a microwave survey meter to check for leakage. Written coverage for parts and labor is the norm among the pros we connect; ask for it.
Our over-the-range microwave went completely dark mid-popcorn. The technician found a blown line fuse, then traced it to a cracked door switch. He replaced both and showed me why the fuse would have blown again if he had only swapped the fuse.
The built-in in our wall oven stack hummed but did not heat. A new one would have meant a new trim kit too. The tech tested the diode and magnetron, replaced the magnetron, and checked for leakage with a meter before he left.
Blue sparks kept flashing inside the cavity. The technician pulled a waveguide cover that was charred from spatter, put in a new one, and told me how to wipe it down so it does not happen again.
The drawer microwave kept running even at zero, which scared us. The technician diagnosed a stuck relay on the control board, ordered the exact board, and installed it on a return visit.
When the light, fan and turntable all work but food stays cold, the high-voltage circuit has failed. The most common causes are a bad magnetron, a shorted diode, an open capacitor, or a burnt transformer. These parts carry lethal voltage, so let a trained technician test them.
Not until someone looks at it. Arcing tends to start at a greasy waveguide cover or a bare spot in the cavity paint, and it can take out the magnetron if it keeps happening. If it smokes, leave the door shut and unplug it if the cord is within safe reach.
A totally dark microwave often has a blown line fuse. The fuse usually blows because a door interlock switch failed and the monitor switch shorted the circuit on purpose. Replacing only the fuse is not enough; the technician tests the whole switch chain.
Often, yes. OTR, built-in and drawer models cost more and are sized to your cabinets, so replacing them can mean new brackets, trim and vent work. Countertop units are usually cheaper to replace. The technician gives you a written quote so you can compare.
We strongly advise against it. That capacitor stores enough energy to kill, even with the plug pulled. Keep the outer case on and leave the discharge to a technician with proper insulated tools.
Ask for it, especially after high-voltage or door work. Many pros sweep the door seal and vents with a microwave survey meter before they leave, to confirm the unit is sealed properly.
We route microwave calls from houses, condos and apartments throughout Leander and nearby neighborhoods. Dispatchers send each job to an independent pro already working close to your address, which helps when an OTR unit needs a second set of hands to lift off the wall plate.
The dispatch line is open 24 hours a day. A late-night call is usually booked for the next morning, and daytime calls often turn into same-day visits when a local pro has an opening.
