When a burner refuses to light or refuses to shut off, you need a person who knows cooktops, not a general handyman. Our dispatchers connect callers around Leander with independent stove specialists, any hour of the day.
We do not send just anyone with a toolbox. The pros in our network work on cooktops week in and week out, and they know the difference between a bad spark module and a wet burner head.
Every contractor we connect you with runs their own licensed, insured business. Gas work on a range touches a supply line, so ask the pro about their gas certification for your area before work starts.
You see the number before a screwdriver turns. The pro gives you a written, upfront quote after the diagnosis, and the choice to proceed is yours.
Our dispatchers look for the nearest pro with an opening around Leander. Same-day visits are common when a local technician has room on the schedule, and we tell you the arrival window on the call.
Expect a manometer, a digital multimeter, an orifice set, and tech sheets for slide-in, freestanding and pro-style ranges. The right tools mean the first visit is usually the one that gets the burner going again.
Freestanding ranges, slide-in ranges, drop-in cooktops, induction surfaces and the heavy pro-style rangetops with open burners all come through our line. The problem is almost always on top: a burner, an igniter, a switch, a control board or the glass itself.
Have the model number handy if you can. It usually sits on a sticker under the cooktop lip, inside the storage drawer, or behind the lower kick panel, and it lets the tech pull the right parts list before arrival.
These are the cooktop faults that fill our phone log. If yours is not listed, call anyway; the dispatcher will match you with a pro who knows that model.
A burner that clicks and clicks after it lights, or one that never sparks at all, usually points to a wet or cracked igniter, a stuck valve switch, or a failing spark module. The tech checks each electrode gap and listens for which burner the module is firing.
If the flame looks orange, ragged or jumps off the burner, something is off with air or gas delivery. The independent pro cleans the ports and orifice, confirms the cap sits flat, and measures manifold pressure against the spec on the tech sheet.
A coil that only heats on high, or never heats at all, gets tested with a multimeter at the element, the burner block and the infinite switch. Burnt receptacles are common on older ranges and are a fire risk worth fixing right away.
Glass ceramic cooktops hide radiant elements and a limiter under the surface. A zone that stays dark, a hot-surface light that never goes out, or a cracked or crazed top all need a pro, and a cracked top should not be used until it is replaced.
Blinking codes, a zone that will not detect the pan, or a cooktop that shuts down mid-boil are classic induction calls. The technician checks the cooling fan, generator board and coil connections with the service manual open.
Stripped knobs, stiff valve stems and gas valves that leak by are common on busy kitchens. The pros also convert cooktops between natural gas and LP orifices and install the anti-tip bracket that keeps a freestanding range from tipping onto a child.
Bring these notes to the phone call. The pro confirms the cause with real tests before quoting a part.
| Symptom | Common cause | What the tech checks |
|---|---|---|
| Clicking that will not stop | Wet or shorted valve switch, cracked igniter | Switch continuity, harness, igniter gap |
| No spark on any burner | Spark module or power supply | Module output and incoming voltage |
| Yellow or lifting flame | Clogged ports, wrong orifice, pressure off | Ports, cap seating, manometer reading |
| Coil only heats on high | Failed infinite switch | Switch cycling with a multimeter |
| Smooth-top zone stays cold | Radiant element or limiter open | Element and limiter resistance |
| Induction error code | Cookware, fan or power board | Code lookup, fan, board voltages |
No forms, no waiting for an email. Here is what happens after you dial our dispatch line.
One phone call starts everything. Tell us what the cooktop is doing, and we look for a nearby pro with time on the schedule.
The technician drives to your home with common igniters, coil elements, switches and orifices on the truck. You get the arrival window on the call, and callers frequently see a pro the same day when someone nearby is available.
After testing, you get a plain explanation and a written quote from the technician. You decide whether the fix makes sense for your range.
Once the part is in, the technician lights or powers every burner, checks flame or heat on each setting, and leak-tests any gas fitting that was opened.
A careful pro pulls the cooktop or lifts the top before guessing. On gas units they check pressure at the manifold; on electric units they read voltage at the switch and resistance at the element. That is how a cheap igniter does not turn into an expensive control board by mistake.
Call now and we will look for a local stove pro with an opening.
The igniter on our gas range would not quit clicking after a boil-over. The pro pulled the knobs, traced it to one wet switch under the panel, replaced it and tested every burner before he left.
A tenant called me about a coil burner that sparked when it was plugged in. The pro found the burner block had cooked itself, swapped the block and the element, and explained why both had to go together.
My induction cooktop kept flashing an error and shutting off in the middle of cooking. The tech checked my pans with a magnet first, which was fair, then found the cooling fan was jammed with grease. Cleaned and replaced the fan, and it has run fine since.
We moved into a house with propane and brought our natural gas range. The dispatcher found a pro who converted it the next morning, swapped every orifice, flipped the regulator and checked the flames burner by burner. He also put in the anti-tip bracket the old owners never installed.
Nonstop clicking usually means moisture or grease has reached a valve switch or igniter, so the spark module thinks a burner is still asking for a spark. Sometimes drying it out helps, but a shorted switch needs replacing.
It is worth treating as a warning. Healthy burners show a firm blue flame. Yellow tips point to a dirty burner, a misaligned cap, or gas pressure that is off, and the technician can confirm it with a manometer.
Shut off power at the breaker for an electric range, or close the gas shutoff valve behind a gas range, then call us. A burner stuck on usually means a welded infinite switch, a stuck relay, or a valve that will not seat.
Cracked glass ceramic cannot be patched safely. The fix is a replacement top, and the pro checks the radiant elements and limiter while it is off. Avoid using the cooktop until then.
Most gas ranges and cooktops can be converted with an LP kit from the manufacturer. The pro swaps the burner orifices, adjusts the pressure regulator, and checks every flame afterward.
Induction only works with magnetic cookware. If a magnet does not stick firmly to the bottom of the pan, the zone will not heat. If your pans pass the magnet test, the technician looks at the coil, sensor and power board next.
We route stove calls from across Leander and the surrounding towns. Whether your range sits in a downtown condo or a farmhouse at the edge of the county line, our dispatchers look for the closest pro with time to come out.
If you manage rentals, mention the unit and the tenant contact when you call. The dispatcher passes it to the pro so the visit goes smoothly.
One call to our dispatch line connects you with a local stove pro.
